A Homeowner’s Guide To Door Lock ReplacementA Homeowner’s Guide To Door Lock Replacement

When it comes to home security,  the door lock is one of the A Homeowner’s Guide To Door Lock Replacement. A worn out lock or a lost key can put you and your family at risk. To improve your security, consider replacing your existing locks.

The process is simple enough for a do-it-yourselfer, and there are a number of products out there to choose from. Make a list of requirements and visit your local hardware store or do a quick online search.

One of the most important steps is to determine the lock’s exact dimensions. This will help you decide which upgrades are worth the investment. Depending on your budget and needs, you can either install the new locks yourself or hire a professional.

Making an offer on a home: What to know

You’ll want to measure the diameter of your existing holes to make sure they match. Having these measurements in hand will also allow you to properly install your new latch.

As with most things, if you are not careful, you could end up with a broken door. It’s not uncommon for homeowners to install a new knob or other lock component without properly measuring the size of the holes.

In order to install the most efficient lock possible, you need to use the correct screws. Measure and select screws that are both long and strong.

For some people, the best way to do this is to get a professional to do the installation for you. You can pay as little as $50 or as much as several hundred dollars.

…

Installing a Tongue and Groove FloorInstalling a Tongue and Groove Floor

Tongue and groove is a type of joint used for siding, ceilings, and interior walls. This method of construction allows wood planks to be interconnected without a gap, so there’s no chance that boards will shift during installation.

Is composite decking more slippery than wood?

One side of a tongue and groove board has a protruding ridge, the “tongue,” which runs the entire length of the board, while the other side has a groove from end to end. During installation, the ridge side of a board is fitted into the groove side of an adjacent board to create a tight seam.

Installing a tongue and groove floor is an excellent option for creating a smooth, level surface. In addition, this type of joint is more durable than a traditional nail-on or nailed-together floor.

If you’re installing a tongue and groove floor, you’ll need to use a router with a depth setting capability to make your cuts. This is important because it’s difficult to accurately cut a tight tongue and groove with just a table saw.

When you’re making a tongue and groove, it’s best to use wood that is consistent in thickness, as this will help you produce a smooth surface. You can also use wood that is stained to match the rest of your house for a more attractive look.

For a good joint, it’s important to have a square tongue that’s one-third the width of the stock and centered on the edge. It’s also important to have a matching groove that’s a bit taller than the tongue so the shoulders of the two pieces fit together tightly. If you don’t, you’ll have a tendency to break the tongue when you push it into the groove.

…